Want the motor, find the strong! Dongguan Li Qiang electrical and mechanical sincere service for you!
Dongguan City Li Qiang mechanical and Electrical Equipment Co., Ltd.
Address: No. 142 Chek Ling village, Houjie Town, Dongguan
Zip code: 523940
Web site: www.cdkeer.com
Dongguan City strong electrical equipment Co., Ltd. specializing in the production and sales all kinds of AC and DC motor, motor, pump motor, oven brake motors, gear motors, aluminum motors and all kinds of motor, speed governor, worm gear reducer series; industrial exhaust fan. With shoes, textile, injection, wire and cable, oil pressure, hydraulic machinery and other advanced, practical equipment. The company has always been committed to improving the quality of products and the progress of science and technology, to the "customer first, reputation first" purpose, grow with you all the way.
Cycloid reducer with cycloid meshing, planetary transmission principle, it is usually also called planetary cycloid reducer, planetary cycloid reducer can be widely used in petroleum, chemical industry, environmental protection, transportation, cement, textile, pharmaceutical, food, printing, metallurgy, mining, lifting, construction, power and other industries. As the driving or deceleration device. Its unique stable structure can replace ordinary cylindrical gear reducer and worm gear reducer in many cases. Therefore, planetary cycloid reducer is widely used in various industries and fields, and is widely welcomed by users.
(two) conditions of use:
1. The cycloid gear reducer is allowed to be used in a continuous working situation and allowed to operate in both positive and reverse directions at the same time.
2, the rotational speed rating of the input shaft is 1500 / sub, and it is recommended to use the 6 pole motor with 960 turn / points when the input power is greater than 18.5 kW.
3. The working position of the horizontal installation cycloid gear reducer is horizontal. At installation, the maximum horizontal inclination is generally less than 15 degrees. Other measures should be adopted to ensure adequate lubrication and prevent oil leakage at more than 15 degrees.
4. The output axis of the cycloid reducer can not be subjected to a larger axial force and radial force. Other measures should be taken when there is a larger axial force and radial force.
1, the horizontal cycloidal reducer can be lubricated in oil pool under normal conditions. The oil surface height can be kept in the middle of the oil window. If the working condition is bad, and the ambient temperature is at high temperature, circular lubrication can be adopted.
In general, 2 cycloid reducer selection No. 40 or 50 machine oil lubrication at room temperature, in order to improve the performance of reducer and prolong the service life of the cycloid reducer, recommended by the No. 70 or no. 90 gear oil, working in high temperature and low temperature conditions can also be re consider the lubricating oil.
3, vertical installation of planetary cycloid pin reducer should be strictly protected from oil pump breaking oil, in order to avoid damage to the components of the reducer.
4. The gas cap on the upper part of the rotating seat can be refueling. When the oil is placed, the oil slug can be released in the lower part of the rotary opening seat. The reducer has no lubricating oil when it comes out of the factory.
5, the first time on 100 hours of operation should be replaced with new oil (and internal oil rinse) after continuous work, the replacement once every half a year (8 hours), if the poor working conditions may be appropriate to shorten the time of oil, proved the reducer for frequent cleaning and oil (such as 3-6 months) have plays an important role in prolonging the life of gear reducer. Lubricating oil should be often added during the use.
6. The new reducer in our factory has been lubricated with grease and replaced every six months. The oil is used to grease two aluminum - 2 or 2L - 2 lithium base.
In 1, the output shaft is additionally arranged on the cycloid reducer coupling, using direct method does not allow thump pulley, sprocket and other links, because the structure cannot output the speed reducer shaft axial force of the shaft end of the screw thump, available screws press connectors.
2, the axis diameter of the output shaft and the input shaft is selected by GB1568 - 79.
3. The ring screw on the reducer is limited to the lifting reducer.
4. When the reducer is installed on the basis of the reducer, the height of the center line of the reducer, the level of the level and the related dimensions of the connecting part should be calibrated. The concentricity of the calibrated shaft should not exceed the allowable range of the coupling.
5, when the speed reducer is calibrated on time, it can be carried out with steel pad or cast iron block. The height of the pad is not more than three, and it can also be made by iron, but when the reducer is calibrated, it should be changed into the flat cushion block.
6, block configuration should avoid the body deformation, should be the basis of the bolt on both sides of the symmetrical arrangement, the distance of each other can make enough water on the free flow of irrigation.
7. The irrigation of cement slurry should be dense, no air bubbles, gaps and other defects